first commit

tools/flash.sh

@@ -0,0 +1,37 @@
+#!/usr/bin/env bash
+# ============================================================
+#  一键: configure (首次) -> build -> flash -> reset & run
+#  调试器: ST-Link / J-Link / DAP-Link 均可 (走 SWD)
+#  产物:   build/stm32f103_spl_clion.elf
+# ============================================================
+set -e
+
+ROOT="$(cd "$(dirname "$0")/.." && pwd)"
+CLT="/c/ST/STM32CubeCLT_1.18.0"
+CMAKE="$CLT/CMake/bin/cmake.exe"
+NINJA="$CLT/Ninja/bin/ninja.exe"
+PROG="$CLT/STM32CubeProgrammer/bin/STM32_Programmer_CLI.exe"
+BUILD="$ROOT/build"
+ELF="$BUILD/stm32f103_spl_clion.elf"
+TOOLCHAIN_FILE="$ROOT/cmake/gcc-arm-none-eabi.cmake"
+
+# ---- 1. 首次 configure (生成 build.ninja) ----
+if [ ! -f "$BUILD/build.ninja" ]; then
+  echo "==[ 1/3 configure ]=="
+  "$CMAKE" -S "$ROOT" -B "$BUILD" -G Ninja \
+    -DCMAKE_TOOLCHAIN_FILE="$TOOLCHAIN_FILE" \
+    -DCMAKE_MAKE_PROGRAM="$NINJA" \
+    -DCMAKE_BUILD_TYPE=Debug
+else
+  echo "==[ 1/3 configure ]== (skipped, build/ 已存在)"
+fi
+
+# ---- 2. 编译 ----
+echo "==[ 2/3 build ]=="
+"$CMAKE" --build "$BUILD" --config Debug
+
+# ---- 3. 烧录 + 校验 + 复位运行 ----
+echo "==[ 3/3 flash ]=="
+"$PROG" -c port=swd -w "$ELF" -v -rst
+
+echo "==[ done: 已烧录并复位运行 ]=="